Carbon black powder more than 200 mesh screening classification using what machine is appropriate? Rotating vibrating screen is more suitable. Screening granular materials using rotary vibrating screen and linear screen, but the powder, especially the finer,
The rotary vibrating screen produced by Liwei Machinery Co., Ltd. has the following characteristics: good airtight performance, convenient disassembly, internal and external easy cleaning, discharging port can be 360 degrees of arbitrary adjustment, a variety of screen cleaning device, low energy consumption, low noise, without foundation installation, widely used by the broad powder, particles, liquid and other industries. By adjusting the phase Angle of the upper and lower eccentric weight, the movement track of the material on the screen surface can be changed to ensure that the material is fully classified. Can be installed according to the needs of customers (2-500 mesh), two layer vibrating screen models are: 600, 800, 1000, 1200, 1500, 1800, 2000, it is recommended that the screen machine use three layers below. It is not easy to rust, corrosion resistance, acid and alkali resistance. The contact part is made of 304 stainless steel, and the lower part is made of carbon steel. The dustproof cover is installed above the two-layer vibrating screen body, which will not produce dust and is conducive to environmental protection. Vibrating screen is also known as rotary vibrating screen, three dimensional vibrating screen, vibrating screen extension machine, circular vibrating screen, sieve powder machine.
Diameter 800 vibrating screen can be divided into one layer, two layer, three layer,, heavy filtering, a layer type vibrating screen can also be divided into two complete grain size.
Shaking screen accessories: stainless steel screen, (silica gel, rubber) ball, vibration motor, sealing ring, etc. By the vertical motor as the excitation source, the upper and lower ends of the motor are installed with a eccentric hammer, the motor rotation movement into a horizontal, vertical, inclined three dimensional movement, and then the movement is transmitted to the screen surface. Adjust the upper and lower ends of the phase Angle, can change the material on the screen surface movement track.